Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What Tube tester would be best to buy
#1

I’m looking for a tube tester that works, without spending an arm and a leg for it. Also what would be the best one to look for? Especially for older Philco radios.

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
#2

Hickok 533. All of the good at a better price than a TV-7.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

I use an I-177 made for the signal corps for WW2; found it locally and had it calibrated all for about 200. Works great!
#4

Ok I bought a Jackson 648s for $236. So far it is working great. Going through my Philco 41-295x I found 5 bad tubes, I have them on order, so hopefully it will work now.

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
#5

Good choice!  I like my 648S.  There is a Jackson Model 648 tube tester manual that can be bought from https://vacuumtubesinc.com/index.php/boo...anual.html for $28.50.  It's a bit pricy but useful.
#6

I found a free updated one on the web, plus a very complete tube substitution manual, it was also free. I can upload it to the Phorum is you need it.

Michael

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
#7

I need a tube tester so I can restore my radios. Should I be considering a utracer3 or something more traditional like a Hickok model?
#8

I had not heard of the uTracer; I have an old I-177 that I use for these old tubes...something like that will need to be calibrated, probably
#9

Personally, I think the tube tester which offers the best bang for the buck is the Heathkit TT-1, with its optional TT-1-A adapter. It is a dynamic mutual conductance tester, and is sometimes overlooked by those who want the Hickok testers.

I picked mine up at an auction of an old radio-TV repair shop in western Kentucky back in the 1980s. In more recent years, I fully recapped it, found the calibration instructions online, and calibrated it.

I consider it to be the best two dollars I ever spent. Icon_biggrin

--
Ron Ramirez
Ferdinand IN
#10

Am I correct that the consensus is a conventional tube tester is preferred to a curve tracer?
#11

To repair radios you do not really need a curve tracer. If you are into stereo amps, that might be justified; else a mutual conductance tester is all you need. And some would argue that even that is too much.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

Hello nortonz,
My self I use a Precision 920 and a B&K tube tester and some other handy test equpment to have is VTVM plus Signal tracer and Signal generator.
Sincerely Richard
#13

If you're in Canada, a Stark 9-66 is one of the best testers built/sold here; Stark used Hickok patents.
#14

Thank you for the help. Now I know how to proceed.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 3986 online users. [Complete List]
» 1 Member(s) | 3985 Guest(s)
Avatar

>