Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
BTW, thanks to Brian for all the info. It would have been much more difficult without it. Also, I forgot to mention that my loop is the 25 inch square model.
And oh yes, credit where credit is due. That Silvertone 4586 is Andrea's.
She bought it at the MARC swap meet in Lansing last July.
Ed
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Ed a buddy has one. I seem to remember that is a fairly hot set.. Likes spitting out all those electromagnetic waves that invade it's space 8)
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
BTW, can you identify that radio shown in the background of the last pic?
Ed
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
38-690
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Correct! Being that this is the Philco Phorum, I had to put something Philco in my post.
Ed
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
After building my first loop antenna, I discovered two problems. One, I don't have a good place to put it. Two, loop antennas are incompatible with cats (we have two). Searching the Internet I ran across an article about a Hula-Hoop-Loop, so I built one.
[Image:
http://i985.photobucket.com/albums/ae335...4_3390.jpg]
The Hula-Hoop is about 33 inches in diameter. I pulled the hoop apart at the joint looped a four conductor telephone cord through two times. I connected one end of one conductor to the other end of the next conductor and so on to create eight loops. I added single wire loop for the sense loop. As it turns out it wouldn't tune the high end of the band. I removed two turns. Now I'm loosing a little of the low end. As I have time, I will play with this some more.
Steve
M R Radios C M Tubes