Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Sorry for another crappy pic. Two cameras and I hate both of them
No race on this chassis. Taking my time. Maybe I'll have it up & running tonight.
[Image:
http://antiqueradios.com/gallery/d/79688...B1_001.jpg]
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 909
Threads: 117
Joined: Jun 2007
Brian,... "whew"!! (hee hee)!!!!...nice chassis indeed!.... you only have about 10 more caps to go!, then your ready for the ol-variac slow up test!Mostly good condition orig cloth-wiring insulation too!?? Ah, the "sound",.. the "great feeling" of supplying new-life into a fine vintage Philco!!From the looks of the orig bias-resistor, dont be surprised if you get audio very soon!!Looks like the sets chassis is not badly-molested from the past too boot! Im not that lucky these days!(hee hee)!! I know you will do a great-job in bringing that set back to life!! Enjoy your vintage Philco!! Thanks for the photos!! As Texans always say
Caledonia !!.. git a lil on ya!!) hee hee!!
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Ok boys, before I damage something. How does the front of the dial shaft come apart, so I can remove the dial limp shade?
[Image:
http://antiqueradios.com/gallery/d/79826...b+dial.JPG]
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
What looks like a nut...which your finger is pointing at...is a nut. Loosen and remove it; its mating part is behind a piece of metal which is directly behind the shadow mask.
But if you are wanting to remove the dial lamp, there is no need to remove the shadow mask...the dial lamp assembly is behind the shadow mask, held onto the tuning condenser with one screw, and can be removed from behind fairly easily.
--
Ron Ramirez
Ferdinand IN
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
No, I want to remove the dial mask for cleaning. Plus, I want to clean the tuner. I tried removing that nut, but it's tight. So I wanted to be sure. No turning back if I screw up
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php