Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

The gift supreme for Christmas - a PHILCO
#1

[Image: http://www.philcoradio.com/images/phorum/18B_sm.jpg]

A fresh restoration of an 18B I did for myself, as a Christmas present from me...to me. Icon_biggrin

Cabinet brought back from the brink of firewood by Barry Jones.

Chassis by me. I also cleaned and polished the escutcheon and knobs.

May all of you have a very Merry Christmas and a safe, joyous and Philco-filled New Year.

--
Ron Ramirez
Ferdinand IN
#2

It's very nice, Ron. The 18 is a good performing radio.

M R Radios   C M Tubes
#3

Thanks Steve. The chassis still has a few bugs, but I'll work them out later. It's good enough for now to listen to Christmas music on.

I've always liked Model 18 sets. In fact one of my first Philcos was an 18L lowboy, many years ago. Great radio. But the 18B takes up a lot less room. Icon_smile

--
Ron Ramirez
Ferdinand IN
#4

WOW Icon_eek Beautiful Ron!! You should post some before pics. So, when are you going to ship it my way? Icon_lol Merry Christmas Icon_wink

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#5

Hey Brian, you're the 650 guy...why would you want a Model 18? Icon_lol

Well, the 18 is the ancestor of the 650...

I wish I had taken a frontal "before" pic. I do have a couple pics of the cabinet, from the side, showing the rippled veneer that was pulling from the cabinet. The cabinet has all new veneer on the top and sides now. Will post those photos later...

--
Ron Ramirez
Ferdinand IN
#6

That is a very nice looking radio. What a nice Christmas gift, even if it is from yourself. Icon_smile

Ed
#7

Ron, how about giving me some dope on Barry Jones? Where is he located?

I have a Stromberg-Carlson 145P cabinet I need to have finished. Sounds like he knows his stuff.
#8

Doug, he's close to Ron. He did my 116B cabinet. Beautiful work I might add. His email is mrtruetone@aol.com

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#9

Hi Doug

As Brian said, Barry Jones is here in Evansville, a mile or less from me. He does good work.

--
Ron Ramirez
Ferdinand IN
#10

Here's a few more pictures for your amusement.

As I said, I regret that I did not take a good frontal "before" shot of the cabinet.

[Image: http://www.philcoradio.com/images/phorum/before2a.jpg]

This blurry photo sort of shows the waviness of the veneer on the side.

[Image: http://www.philcoradio.com/images/phorum/after1.jpg]

From a similar angle, you see that now, all of the veneer on the top and sides is new.

[Image: http://www.philcoradio.com/images/phorum/before1a.jpg]

Back view of how the cabinet originally looked. You can see more clearly the poor condition of the veneer on top and sides.

[Image: http://www.philcoradio.com/images/phorum/after2.jpg]

Another "after" shot, from a similar angle as the one above. No, the AC cord does not look authentic. I fully intend to replace it later. I just threw that gray one on there in a hurry so I could listen to Christmas music on this radio yesterday afternoon.

Also later on, I intend to clean the top of the chassis using Etech's method. Icon_smile

[Image: http://www.philcoradio.com/images/phorum/after3.jpg]

And finally, a better frontal shot of this radio. It plays almost as well as it looks - it still has a bug in the 2nd detector-AVC-1st audio tube, or in this area. I'll have to chase that down later on. For now, however, it's back to the customers' radios...

--
Ron Ramirez
Ferdinand IN
#11

Hi,

It's a beauty, Ron. Merry Christmas!

Paul
#12

Paul, Doug, Ed, Brian, Steve...and everyone...thanks very much...a Merry Christmas to all!

--
Ron Ramirez
Ferdinand IN
#13

Yes very nice. Always feels to good to get one off the bench and playing.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#14

I think I've figured this one out. After replacing the 75 tube for the THIRD time...it is behaving itself so far.

Last night I listened to part of the radio broadcast version of "It's A Wonderful Life" (which also featured Jimmy Stewart) on this 18B, being broadcast from WWL, New Orleans.

--
Ron Ramirez
Ferdinand IN
#15

What is it with the type 75 tubes? When I finished my 18, it made a popping, crackling sound every few seconds. As the radio would warm up, it would get less frequent.It turned out to be the 75 tube.
The model 18 is a fantastic radio. It is a very sensitive radio. Mine will pick up stations that most of my other radios won't.
Steve

M R Radios   C M Tubes




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM
Philco 91 Speaker Replacement
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM
Philco 91 Speaker Replacement
I was wondering if I could use a more common Philco speaker and just add the resistance I need for the coil and get a ne...dconant — 07:45 AM

[-]
Who's Online
There are currently 3074 online users. [Complete List]
» 2 Member(s) | 3072 Guest(s)
AvatarAvatar

>