09-12-2014, 05:13 PM
1. Yes, you can use a regular cap rated at 400 volts or higher.
2. Surface has to be clean and an area that large might need more heat than what you're using puts out. Clean the area well and use some flux on it. An alternative is to run a ground wire out the bottom and ground it at a point under the chassis as close as possible to the cap.
3. Yes, you can use regular caps if the voltage rating is high enough.
2. Surface has to be clean and an area that large might need more heat than what you're using puts out. Clean the area well and use some flux on it. An alternative is to run a ground wire out the bottom and ground it at a point under the chassis as close as possible to the cap.
3. Yes, you can use regular caps if the voltage rating is high enough.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
