11-13-2014, 10:41 PM
Looks really nice and very original.
If you want to avoid the seam on the electrolytic, next time cut the can right under where the top cap is crimped on. You can then restuff the cap and then epoxy the cap back on. If you are careful, you cannot tell that the cap was restuffed, even if you examine it closely.
If you want to avoid the seam on the electrolytic, next time cut the can right under where the top cap is crimped on. You can then restuff the cap and then epoxy the cap back on. If you are careful, you cannot tell that the cap was restuffed, even if you examine it closely.
