08-31-2015, 05:02 PM
I will leave the resistors alone.
The blue resistor goes to the grid pin 3 of the 27 tube it reads 2.5meg ohms
the first yellow goes to the vol control and the main transformer reads 2.4K
second yellow goes to the main transformer and ground reads 1.8k
orange resistor looks to go to the output xformer
the filter cap is listed as 16mfd it doesen't say there are 2 -16mfd but I have 2 red and one black leads. the Black goes to ground the two red ones goes to the Inductor? Should I take it there are 2-16 mfd's?
The blue resistor goes to the grid pin 3 of the 27 tube it reads 2.5meg ohms
the first yellow goes to the vol control and the main transformer reads 2.4K
second yellow goes to the main transformer and ground reads 1.8k
orange resistor looks to go to the output xformer
the filter cap is listed as 16mfd it doesen't say there are 2 -16mfd but I have 2 red and one black leads. the Black goes to ground the two red ones goes to the Inductor? Should I take it there are 2-16 mfd's?
