12-22-2016, 11:58 AM
The Plate impedance of the tube is 150 Ohm. So to emulate it that's what has to be added per diode.
The max output current of the tube is 70mA, which is 35mA/resistor, which dissipates 0.184 Watts. This makes 3W rating for the resistor more than enough. 2W will do fine.
If however you want to go by dropping 22V as it is what the tube does, than the resistance has to be increased.
The max output current of the tube is 70mA, which is 35mA/resistor, which dissipates 0.184 Watts. This makes 3W rating for the resistor more than enough. 2W will do fine.
If however you want to go by dropping 22V as it is what the tube does, than the resistance has to be increased.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
