[vecher]

Ok, Terry.. Here is what I found out..

1. No numbers on the power supply .. except 305 in a circle..

[Image: http://i292.photobucket.com/albums/mm38/...sysn76.jpg]

2. Tx has number of E-2654

3. RX has number 3147

I have NO RFC4 .. That point goes directly to the coil of a Relay .. I measured about 14.4 K

[Image: http://i292.photobucket.com/albums/mm38/...m81elv.jpg]

I have this resistor used in first run only...

[Image: http://i292.photobucket.com/albums/mm38/...wo2pmi.jpg]

So looks like I do not have the right schematics for this set..

Skip...