Well much progress on my cabinet finally. Currently everything is close to being ready for a top coat, as it is sealed with sanding sealer. 23 steps so far.
I have to decide if I want the rim around the top to be darker. I did the grille bars with VanDyke Brown, but thought the rim should be lighter. There is one section between the bottom of the front panel and the radio front, a narrow board, that is too light. Can't really tell from the pictures. That could get a shot of Extra Dark Walnut classic toner to blend it in.
Once ready, I will spend some time with my new sprayer, a Fuji Mini Mite 3 stage HVLP unit. I will practice on a spare piece of wood so I can get my pattern and flow right. Plus learn how to shoot vertical surfaces too.
Here are some quickly shot pictures I took today so you can get an idea of the project so far.
I have to decide if I want the rim around the top to be darker. I did the grille bars with VanDyke Brown, but thought the rim should be lighter. There is one section between the bottom of the front panel and the radio front, a narrow board, that is too light. Can't really tell from the pictures. That could get a shot of Extra Dark Walnut classic toner to blend it in.
Once ready, I will spend some time with my new sprayer, a Fuji Mini Mite 3 stage HVLP unit. I will practice on a spare piece of wood so I can get my pattern and flow right. Plus learn how to shoot vertical surfaces too.
Here are some quickly shot pictures I took today so you can get an idea of the project so far.
Tony
“People may not remember how fast you did a job, but they will remember how well you did it”
