Hello everyone,
I am working on Some RCA 1950s Phono's and looking at buying some that tape used on motor windings ?
As you can see in my Photo how I used heat shrink and spliced the wire but don't really care for it
I thought why not just remove the tape and do a better job and add new tape
Sincerely Rich
(This post was last modified: 02-15-2021, 03:09 PM by radiorich.)
Hello Phlogiston,
is that what they call that special tape used on transformers and motors ?
Sincerely Rich
P.S. I did see this tape 3M 28 White Acetate Cloth Tape, 1" Width
(This post was last modified: 02-15-2021, 07:09 PM by radiorich.)
Hello Phlogiston,
Well 3M™ 28 is a printable white Acetate Cloth Tape with thermosetting rubber adhesive used for electrical insulating. This tape absorbs resins and varnishes and offers excellent conformability in coil wrapping applications.
It is electrically rated for 2500volts and 221 degrees F.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
)
