01-04-2022, 07:30 PM
The connection between Pin 7 and #53 /8C is through the 4700K resistor . See attached picture .
Removing the 6Y6G has no effect on the resistance at Pin 7.
Also I have looking at the connection for the center tap on the tone controller which connects to the terminal board that connects to nothing. The schematic shows this wire connecting to ground. I checked my before pics and this is where is was connected before i started
Removing the 6Y6G has no effect on the resistance at Pin 7.
Also I have looking at the connection for the center tap on the tone controller which connects to the terminal board that connects to nothing. The schematic shows this wire connecting to ground. I checked my before pics and this is where is was connected before i started
