Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Hi to all,
Has anybody ever used any of Howard's "Restore-A-Finish" products? If so, how well does it work? I saw it at a local DYI store and was considering trying it but it's a little pricey. Any input would be great, thanks!
Kevin
Posts: 9
Threads: 1
Joined: May 2011
I personally love the stuff......ESPECIALLY if combined with the howards "feed-n-wax"
my 37-650X BEFORE the howards treatment
[Image:
http://img.photobucket.com/albums/v210/s...G_0825.jpg]
and these are AFTER an application of the restore in "walnut" color and the feed-n-wax followed by a hand-buffing
[Image:
http://img.photobucket.com/albums/v210/s...G_0850.jpg]
[Image:
http://img.photobucket.com/albums/v210/s...G_0845.jpg]
that being said.........if you want a "factory fresh brand-new looking" finish howards IS NOT for you........
it gives it a more "well taken care of original but still 70+ years old" finish which I personally prefer (but thats just my opinion and you know what opinions are like)
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Hey Scott,
Thanks for your reply. based on your photo's, I decided to go ahead and give "Restore-A-Finish" a try! That stuff is amazing!!
My recent find- a 38-4xx had an intact orirginal finish, just like your 37-650x. I couldn't believe how nice it turned out! I like to keep the original finish as well, if it can be made to look good again. I have several other set's I want to try this stuff on. Thanks again.
Kevin
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hmmm. OK, I'm sold. I'll try it out.
Posts: 9
Threads: 1
Joined: May 2011
I'm glad you were pleased with your results.....
one tip that you may have already noticed anyhow but since the wax is a "conditioner" as well sometimes the piece looks better after multiple coats..
I usually keep applying it untill it seems as tho the surface isn't "soaking it up" anymore then I'll wipe it down real good and let it sit for a day or 2 and put on ANOTHER coat ,let sit for 20 mins then wipe it down real good then followed by a hand buffing/polishing with a clean cloth
seems to work for me anyhow
Posts: 19
Threads: 4
Joined: Jun 2011
Do you use anything to clean the surface before applying this product? Seems like you'd want to get the 70+ years worth of dust and dirt off first.
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
I usually the cabinet with a gentle rub down of mineral spirits and oooo steelwool.
Posts: 795
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I've had good luck using GoJo hand cleaner followed up with mineral spirits.
Posts: 336
Threads: 13
Joined: Apr 2011
City: Montreal, Qc
where do we get OOOO steel wool?
Or mineral spirit, for that matter.??
-Mars
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
Most home improvement stores (Lowes, Home Depot, etc.) should have them on the paint / stain isle.
