Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 42-345 grille cloth and knob decals
#1

Hi guys. I was wondering if a person can get exact replacement grille cloth and decals knobs for a Philo 42-345. Thanks! Brian
#2

Welcome to the Phorum!!
Check RadioDaze for decals.  The knobs on that one are a little unusual so try the folks that Ron has listed as resources for knobs.  David, Julie, Kelton and Mike supply original knobs.  I've bought from all but Kelton in the past.  You may have to try them all as they don't have every knob for every radio. The grill cloth looks a bit like the whiskey rayon that Kenneth Richmonds sells but its a little hard to see in the 42-345 photos I was looking at.  
#3

no no no whiskey rayon!


It is like carpeting and I used one off ebay that matched pretty good.


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Hi. I know this is an old thread, but I have the same radio and looking for grill cloth. Can you tell me where you found that one or a name for it?
#5

Welcome MamaJennie! Nichael Katz has a site called Radio Grill Cloth. Good source for fabric.
https://www.radiogrillecloth.com/
Try Radio Daze for knob decals.
https://www.radiodaze.com/decals-48/
Hope this helps. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#6

I’ve recently used both Michael Katz’s fabric and Radio Daze’s decals for a radio of my own. I can attest that you’ll be most satisfied.

My only advice, when ordering the decals, is to make sure that your decal kit includes the “Philco” decal. The kit I ordered had all other decals but not this one, so I needed to order a separate Philco decal. I noticed that other decal kits do include the branding, so just be mindful!

Joseph

Philco 46-480
Philco 49-906
#7

Another learning experience I had. You will benefit tremendously from purchasing decal softener and setting solutions such as Micro-Sol and Micro-Set, AK Interactive Decal Setting Solution, or the like. This will really help to conform the new decals to the surface of your radio and will eliminate the laminated look of your decals.

Joseph

Philco 46-480
Philco 49-906
#8

Thank you. Where would I find those products?
#9

Right now Mike is probably the only good source of Philco-specific cloth, as well as others (I bought both Philco and RCA from him).

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#10

Hello MamaJennie. Just click on the highlighted web addresses in post number 5. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM
Philco 37-116 Cabinet Repair
You'll probably have to get quite a large amount of wax filler, those are some big gaps, and both sides. Nice summer pr...RodB — 10:38 AM
Philco 37-116 Cabinet Repair
Hello everyone. I completely agree with Richard and Dan - in this case, without replacing the veneer, only a wax filler ...RadioSvit — 10:07 AM
Philco 37-116 Cabinet Repair
I have used Timber Mate Timber mate is a grain filler  . You can get it in different colors,so it will be close to...Dan Walker — 09:51 AM
Help with Supreme 599
The 300 ohm line adjustment is used to set the primary of the transformer to a nominal voltage for any line voltage from...DaleHCook — 09:22 AM
Philco 37-116 Cabinet Repair
I think Arran is correct about the substrate expansion. I'm going to give the colored wax a try.dconant — 08:11 AM
Philco 37-116 Cabinet Repair
Hello Guys, What I would do is get  colors of wax filler and fill in the void ! Sincerely Richardradiorich — 12:41 AM
Philco 37-116 Cabinet Repair
It looks to me like the structure under the veneer may have expanded from humidity cracking the veneer on the surface. W...Arran — 09:42 PM
Help with Supreme 599
Iam only getting 4vac out of the tranny For the 80 filament. The line rheostat Looks fine and the tranny is getting 11...daveone23 — 08:45 PM
Rogers Majestic R-646
Transformers rewind? It's very easy! If you don't have round eyes  8-) Vlad95 — 01:55 PM

[-]
Who's Online
There are currently 1278 online users. [Complete List]
» 2 Member(s) | 1276 Guest(s)
AvatarAvatar

>