Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

15x dial needed
#1

New to this so please pardon my stupidity. Have a 15x for 30 years sitting around and finally decided to make a few repairs. the string is broke on the dial but more important is the "plastic"dial scale. been on all afternoon to find the scale and no luck. also need to refinish but that may wait till warmer weather. radio plays last time I plugged in to play but it appears there should be some replacements done on capacitors for safety?? I am old cutlass guy so this is not in my wheel house yet. thanks for any help. Oh, and need one left nob!
#2

Welcome to the Phorum. Some of the more experienced folks will have experience with this specific model but if it has never been recapped you do need to do that to avoid damaging the transformer or other parts of the radio. The electrolytic caps and paper caps (which in this radio are probably inside of bakelite blocks....see: http://www.philcoradio.com/tech/blocks.htm ) need replacing. A schematic can be found here: http://www.philcoradio.com/tech/images/15.jpg : additional info beyond the schematic here: http://www.philcorepairbench.com/schematics.htm . Some useful info if you've never worked on a radio is here: http://www.antiqueradio.org/begin.htm .

Try the folks on this list for the knob: http://www.philcoradio.com/resourceb.htm#l

Lots of threads on this Phorum about refinishing the radio correctly as well, just do a little searching around and asking questions.
#3

thanks for that info. lots of study to do. will tackle when satisfied. lots of caps in there




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 372 online users. [Complete List]
» 2 Member(s) | 370 Guest(s)
AvatarAvatar

>