Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Any information would be nice "first philco"
#1

I picked up this radio on craigslist because i thought it looked neat and to have a piece of history in my house would be nice. Fist of all i'm 21 years old and i have no idea what this thing is much less what tubes are. I know i probably shouldn't have bought this thing but anyways. Can anyone tell me how to get thing thing going. The power cord was all broken so i replaced and now when i plug it in SOME of the the little glass bulbs (tubes i beleive) light up. Do the ones that don't light up need to be replace? If is there anywhere to buy more? Sorry if all the questions are dumb but i'm having a hard time finding any resources on how these things work. the guy who i bought this from said he was the original owner and that he listen to it throughout the 30's he believed. I would like to get this thing working just enough to hear something coming out. From what i have found online its a 19x can you tell me anymore? Attached is a picture. Thanks again guys

[Image: http://i326.photobucket.com/albums/k420/...C_0108.jpg]
#2

Hello and welcome!

First of all...Wow, what a find for your first Philco! The 19X in this cabinet is very hard to find and seldom seen. Congratulations!

A little more info here:
http://www.philcoradio.com/gallery/1933b.htm#l

I must advise you to not plug the set in again until the chassis has been thoroughly checked for signs of trouble. This will include, but not be limited to, replacement of the electrolytic capacitors. You will want to replace all of the electrolytic and paper capacitors in the set for safety and reliability if you intend to use the set on a regular basis. We can help you do all of that.

More info:

http://www.philcoradio.com/tech/plugin.htm

http://www.antiqueradio.org/powerup.htm

If any of the tubes are not lighting up, their filaments could be bad; and if so, they will require replacement. It would be unusual for more than one to be burned out, however. They will not light up like a bulb; they will only have a soft orange glow in the top center (and in the bottom center if you can see it).

There are lots of places that sell tubes and other parts, so relax. Icon_smile

I'm sending you an email regarding your set, also.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Model 70 Cabinet Trim
musar , Well if you have any more questions feel free to post away . Sincerely Richardradiorich — 08:56 PM
Model 70 Cabinet Trim
Although I have not made any cabinets or cabinet parts for a couple of years, I still have some parts left over, includi...Steve Davis — 06:26 PM
philcorepairbench.com - shadow-meter
Thanks Ron.fenbach — 02:43 PM
Model 70 Cabinet Trim
Thank you, Gary. Before making my original post, I had clicked on "Steve Davis Cabinets" only to find that it...musar — 02:25 PM
philco predicta
Welcome to the Phorum, cgl18! I am not your resource for television repair, but lots of friendly help is available here...GarySP — 02:12 PM
Model 70 Cabinet Trim
Welcome to the Phorum, musar! You can send Steve Davis a private message (PM). The site is at the top of the Home page...GarySP — 02:09 PM
Model 70 Cabinet Trim
How do I contact him? The only contact information for him I could find when searching online was a telephone number th...musar — 10:38 AM
philco predicta
Hello, good afternoon, I would like to ask what the possible problem could be if I don't have an image on the screen. I ...cgl18 — 10:19 AM
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM

[-]
Who's Online
There are currently 775 online users. [Complete List]
» 1 Member(s) | 774 Guest(s)
Avatar

>