Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco mystery remote
#1

I recently found this forum and this is my first post!

I have a 39-55 wireless remote radio and about 4 or 5 of the remote units. All of the remotes I have seen have the cabinet with the rounded front and back edges. However, some time ago I found a remote with a different cabinet style which appears to be from the factory. I have not been able to find any information on this particular style and would appreciate any help identifying it.

OK, I'm not sure how to insert a picture of it here, I guess I need help on that too!

Thank you,
Steve
#2

Hi Steve, and welcome!

The 1942 Philco Model 42-1016 used a remote unit that was shaped differently than the earlier ones; this is probably what you have.

Please read my threads on inserting photos in the "How To Use Your Phorum" section.

http://www.philcoradio.com/phorum/showthread.php?tid=29
http://www.philcoradio.com/phorum/showth...p?tid=4371

Basically, your photos need to be hosted on a website or a server dedicated to photo hosting, then you insert a link to your photos into your post.

--
Ron Ramirez
Ferdinand IN
#3

Hi Ron and thank you,

I suspected that it could be a later model although I never saw it pictured in any ads. It is basically square and bulkier looking.

I will not be able to post the picture as I do not have a website.

Thanks again,
Steve
#4

Here is Steve's Mystery Control:

[Image: http://i326.photobucket.com/albums/k420/...emote1.jpg]

[Image: http://i326.photobucket.com/albums/k420/...emote2.jpg]

Note the difference in the styling of this 1942 control compared to the 1939-41 models.

--
Ron Ramirez
Ferdinand IN
#5

Here's the most often found Mystery Control style for comparison.

[Image: http://www.philcorepairbench.com/images/mystctl01.jpg]
#6

Hi- This is my first posting- I fould this list after starting a philco radio oriented group(direct e-mails as opposed to message board) on yahoo groups. But since there's people here, I'll post here as well Icon_smile

I am actually looking for a "Mystery Control" to restore- I have a 39-116 which had the "Mystery Control", but has not got the remote at the moment. If anyone has one in any shape for a reasonable price, please let me know...
(Pics of my Philcos- a 37-650, 39-116, a 41-220 and a 20 are on the yahoo groups "The Philco Radio Group" listing through http://www.yahoogroups.com .)
Thanks

Scott

ng19delta@yahoo.com

Old Cars, Old Radios, Old Pipes and Young Women... What more is there?




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>