Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Diference between 45F and 45L
#1

Hi All;
Since my Philco 45 is a chassis Only..
Can anyone tell me What is the Difference between the Philco 45F and the Philco 45L ??
I know mine was not origionally a Philco 45C, as the Speaker is Not mounted on the Chassis.. My Speaker is 7.5 inches edge to edge and a 6.0 inch cone.. It looks like it was reconed, and it has only one small partial hole, probably from a small bolt..
THANK YOU Marty
#2

See http://www.philcoradio.com/assets/setindex.pdf
45F is a console model
45L is a lowboy model
#3

Hi All;
Wow, I've never seen this list..
Now I have to figure what is the difference between the Console and a lowboy.. I'll just have to look at some pictures..
THANK YOU Marty
#4

See Ron's photo gallery:
http://www.philcoradio.com/gallery/1935a.htm#v
and
http://www.philcoradio.com/gallery/1935c.htm#i
#5

Hi All;
Does Anyone have a picture of a Philco 45F Console, so I can see the Difference between an F and an L ??
THANK YOU Marty
#6

Marty, see my post just above yours.
#7

Hi All;
Thank You Klondike, You were posting Your Links at about the same Time I was asking the Question..
So, a Console is basically a LowBoy withOut Legs, Right ??
THANK YOU Marty




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>