Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help identifying Philco transistor from 1960's
#1

In the early 1960’s I owned an AM transistor radio. I have tried for years to find the maker of this radio as well as the model number and possibly a photo. I have always believed it was made by Philco, but I could be wrong about that. The radio was roughly 12”x10”. It had a black leather case with a leather strap handle at the top. The the entire front of the radio was chrome. The slide rule dial at the top had a chrome sliding cover that could be opened or closed. There were two chrome knobs. It ran forever on 6-8 “D” batteries. Your help in identifying this radio would be greatly appreciated. Bob Bonner.
#2

Welcome to the Phorum! Your description covers a lot of radios of that era I think, but perhaps someone will recognize it. The photos on this site stop at 1960 so probably don't have what you are looking for. There are photos on the radiomuseum.org site that might also help you. You can search for specific manufacturers and time periods on the main search page. Maybe something like this one, http://www.radiomuseum.org/r/philco_t_805t80.html or a General Electric http://www.radiomuseum.org/r/general_el_p_865b.html . Unfortunately I think there are lot to look through if its not a Philco (and they don't have pictures of all radios either). Good Luck!
#3

Thank you sooooo much! You were spot on. The Philco link you supplied at http://www.radiomuseum.org/r/philco_t_805t80.html
was IT. I can't thank you enough. Your 1st guess was correct.Icon_biggrin
#4

Glad I could help...it was mostly luck! Maybe one will come up for sale on ebay or craigslist and you can pick one up.
Icon_razz




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2770 online users. [Complete List]
» 3 Member(s) | 2767 Guest(s)
AvatarAvatarAvatar

>