Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Which transitone model is this?
#1

What model is this one, and what would be a reasonable price for one like it? I kind of like the mid-century styling on it. It's a nice chunk of wood.


Attached Files Image(s)
   

Charlie in San Antonio
#2

So what does the stamp on the chassis say?? 42 PT3 striped.

Terry
#3

It's an EBay listing and the pictures don't show the stamps.

Charlie in San Antonio
#4

+1 what Terry said.

http://www.philcoradio.com/gallery/1942b.htm#f

The cabinet was originally covered in photofinish, and the eBay set has had all of its photofinish stripped off.

p.s. It isn't Mid Century - it's from 1942.

--
Ron Ramirez
Ferdinand IN
#5

Thanks. That makes me like it a bit less, though. There are two on EBay right now and both have no Photofinish. Both seem way overpriced for an AA5 set without original finish (it IS an AA5, right?).

Charlie in San Antonio
#6

YEP

Terry
#7

If you can get it to play well and still like the naked look then it is a good little set.

Paul

Tubetalk1
#8

I DO like the naked, blonde wood look (that and the lines made me think "mid-century"), but the two on EBay right now are going for $89 and $125. I think I will wait for a more reasonably priced one.

Charlie in San Antonio
#9

 In my opinion I would NOT pay anymore then maybe $20-25 for an electrically unrestored one with a good original finish, I wouldn't pay more then maybe $10 for a stripped and varnished one like the one shown. I don't really find them that attractive, with or without the Philcote faux finish, they are just uninspired looking.
Regards
Arran
#10

$20 delivered.
#11

You know what a good alternative might be? A PT 7. Similar style but no faux finish to contend with at all.
Fairly simple case to work on and done right they can look great. One of my first Philcos and I still use it often.
And they can be found for not a lot of $
#12

This why bakelite is not a bad thing................


Paul

Tubetalk1
#13

...except when it comes to shipping Bakelite...if it is some typical eBay dummy who thinks that "proper packing" is a few sheets of newspaper wrapped around a fragile radio, and then the whole thing shoved into a too-small box, or a too-large box that lets the radio bounce around inside...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM

[-]
Who's Online
There are currently no members online.

>