Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Phillips Jupiter 543 restoration questions
#1

Hi all,
I'm new to antique radios and have acquired a very cool Jupiter 543, which I believe was produced in Germany, as all the large German cities are represented on the glass facing.

Questions: What may be the approximate value of this if I do choose to have it put back into operable condition and who may know of someone that can undertake cleaning and repairing the electronics for me?  Also, would it benefit me to have the cabinet restored, as it is crazed quite a bit.

It's a very cool radio and I'd like to see it back in running order.

Thanks,

Mike
#2

I think it is not Philco.
It is Philips.
Needs to go to Other Radios.
#3

ahhh.. you are correct... sorry
#4

Hi Mike, Welcome to the Phorum!  I moved the thread to the correct Phorum category...no problem.  Not sure what your radio would be worth when restored but many radios sell for less than the cost of restoration especially if you don't do the work yourself.  Some repair and restoration folks can be found here.  I believe the folks at RadioDaze.com also do repair/restoration.  Check to see if there are any local radio clubs as well, there might be folks in your area that would help.
#5

Mike

restoration, if done by self, can be anywhere from 10 bucks to a couple of hundred, depends on how bad it is.
As for if cabinet restoration benefits you.....you are the one and only person in the whole world who can answer that, as it is pure aesthetics and does not affect performance.
#6

 Paying someone to restore a radio for you is usually a loser in terms of resale value, a lot depends on what you paid for the set to begin with, sometimes even if it was free it still ends up being a loser. Most of us buy a radio because we like the set or because we find it interesting for one reason or another, not for resale.
 From what I can tell this set looks like a typical late 1950s piano key German set, except that it is Dutch make and not a German one even if it was aimed at the German/Austrian markets. I see asking prices for some German sets in the $200-$300 range on fleabay if they are working top end models of certain makes like a Blaupunkt, but then again those are buy it now prices and if they don't take offers they seldom sell. It's basically worth whatever someone wants to pay for it, there is really no guide to what things are worth unless there are lots of other examples to go by, and what you have invested in it really has no bearing on what it's worth to someone else. 
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM

[-]
Who's Online
There are currently no members online.

>