04-04-2015, 08:16 PM
The dial is the same as the Rogers 10-12, but the tube count is only nine compared the 10-12 which has twelve.
It will be a while before I get to the cabinet, as we are getting about 4 inches of snow today.
I will post photos as I go along. someone has been in the chassis and did a bad job of soldering and the work is quit sloppy.. I have checked it over and fired it up and it picks up stations all across the dial, so everything is there and working. After the caps and the bias cell it should perform quite well.. All of my Rogers set have a very nice sound. The more I work on these Rogers sets the easier it gets
It will be a while before I get to the cabinet, as we are getting about 4 inches of snow today.
I will post photos as I go along. someone has been in the chassis and did a bad job of soldering and the work is quit sloppy.. I have checked it over and fired it up and it picks up stations all across the dial, so everything is there and working. After the caps and the bias cell it should perform quite well.. All of my Rogers set have a very nice sound. The more I work on these Rogers sets the easier it gets
